Бележки към издание InstalSystem 5
Версия от 06:06, 16 август 2016 на X - Tweetop PL (беседа | приноси)
| Продукт | InstalSystem 5 |
| Вид статия | PRODUCT INFORMATION |
| Актуално съдържание за версия | IS 5.0 Beta 31 |
Информация относно промени
Версия BETA 31 Rev. 0.0.B31
Модули:
Основен модул, вкл. InstalSystem Мениджър
- Въведена е нова концепция за стенен елементи и функционалности на свързващи стени.
- Въведен е нов физичен елемент - плоча.
- Въведен е нов физичен елемент -покрив.
- Разширена е функцията "Сянка на етаж" с възможност за деклариране на изобразените сенки за всички долни етажи.
Лъчисто отоплително панелна системи
- Въведена е възможността за изчисляване на топлинна мощност на таванни/стенни панели съгласно БДС EN 1264.
Статии в HelpSystem:
ВерсияBETA 30 Rev. 0.0.B30
Модули:
Основен модул, включващ InstalSystem Manager
- Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
- Introduced the possibility to handle by the distribution system mail domains with the sign "-".
Radiant heating - panel systems
- Taken into account results for panels in the radiant heating general results.
- Introduced the presentation of panels connection points on 3D view.
Articles in HelpSystem:
- Editing pipe feeds in a radiant system (actualized)
- How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"
- Smart application - Quick selection of system components
Версия BETA 29 Rev. 16.5.1
Модули:
Base module, including InstalSystem Manager
- Allowed handling of mail domains containing sign "-" by the licence distribution system.
- Improved stability of the program during pasting complex installations.
- Introduced the ability to display the storeys shadow above and below on 2D view.
- For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
Radiant heating - loop systems
- Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
Radiant heating - panel systems
- Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
Radiant heating - dry systems
- Introduced dry system to the neutral catalogue of radiant heating systems.
Articles in HelpSystem:
- Installation, activation and update InstalSystem 5 package
- Manifold and accessories
- Project and application management
Версия BETA 28 Rev. 16.4.1
Modules:
Base module, including InstalSystem Manager
- Improved the automatic snapping of pipe-runs for the ORTO mode.
- Improved the function of rooms interpretation for files imported from InstalSystem 4 package.
- Introduced the ability to insert into the project construction elements: Wall, Window, Door, Opening in wall.
Radiant heating - panel systems
- Introduced the possibility to insert into the project element Ceiling false panel (panel with no connection).
- Added the cooling result card for panel installation: General results cooling.
- Included elements: Wall panel and Ceiling panel in results card: General results heating.
Версия BETA 27 Rev. 16.3.1
Modules:
Base module, including InstalSystem Manager
- Improved function 'automatically connect terminal units'.
- Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
- Introduced possibility of selecting 'None' in the climatic data in case of lack of apropriate climatic data catalogue in the program.
- Added the function of the graphic presentation of the route of flow from a given receiver to the source.
- Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
Radiant heating - dry systems
- Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
Version BETA 26 Rev. 16.2.1
Modules:
Base module, including InstalSystem Manager
- Improved saving files in a network location.
- Introduced the possibility to choose the source for which you want to appear the critical circuit.
Версия BETA 25 Rev. 16.1.1
Modules:
Base module, including InstalSystem Manager
- Added function that allows automatically connect terminal units.
- Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
- The problem with sending Problem Report Form is eliminated.
Radiant heating - panel systems
- Added function that allows connect panels in series.
- Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).
Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
Articles in HelpSystem:
- Connecting storeys with the "Stack" element
- View navigation in the graphical editor
- Combine base files
Version BETA 24 Rev. 15.12.1
Warning! For this version of the program the reinstallation is necessary.
Modules:
Base module, including InstalSystem Manager
- Improved stability and quality of the program.
Radiant heating - loop systems
- Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
- Standarized the content of data table for heating/cooling zones at various ranges of editing.
- Introduced permanent visibility of the field Pipe laying pattern in the data table for heating/cooling zones.
- Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.
Articles in HelpSystem:
Version BETA 23 Rev. 15.11.1
Modules:
Base module, including InstalSystem Manager
- Fixed the problem with sending the Problem report form.
- Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
- The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
Radiant heating - loop systems
- Changed the designation of nodes in the grid which supports the manual drawing of the loop.
- Added message box indicating the inability to remove the RHC loop.
Heating network with balancing
- Fixed the automatic sizing of manifolds' cabinets.
- Improved the propagation of the default data for manifold cabinet.
Articles in HelpSystem:
- Editing pipe feeds in a radiant system
- How to make the program run faster
- Installation with ceiling heating and cooling system in commercial building
- Search components in the project
Версия BETA 22 Rev. 15.10.1
Modules:
Base module, including InstalSystem Manager
- Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
- Improved ORTO and AUTO modes.
- Fixed the problem with sending error report form after crash of the program.
- Improved overall stability and quality of the program by eliminating the reported errors.
Articles in HelpSystem:
Версия BETA 21 Rev. 15.9.2
Modules:
Base module, including InstalSystem Manager
- Modified the way of importing base drawing files.
- Added a Select components in rectangle function under the left mouse button.
- Improved acting of ORTO mode when moving objects.
- Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
Radiant heating - loop systems
- Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
- Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
Heating network with balancing
- Added the possibility to use multi-circuit heating floor zone.
- Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
- Added the possibility to supply multi-circuit heating floor zone from several manifolds.
- Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.
Articles in HelpSystem:
- Calculation of cooling capacity for radiant systems (floor, wall or ceiling)
- How to calculate a file using a package configuration other than the one under which the file was created
- Installation with underfloor and wall radiant heating system in single family building
Version BETA 16.1 Rev. 15.5.17
Modules:
Base module, including InstalSystem Manager
- Added new tool to search and select items in the project.
- Improved the import and export of bases.
- Introduced the control of print range which based on the edition range and the elements' styles.
- Introduced the possibility to highlight and select project's elements to which messages on the diagnostic list referred to.
- Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
Radiant heating - loop systems
- Improved the functionality of pipe feed automatic generation.
Articles in HelpSystem:
Версия BETA 15.1 Rev. 15.4.21
Initial scope of modules:
- Base module, including InstalSystem Manager
- Radiant heating - loop systems
- Cooling mode for radiant systems
- Heating network with balancing
- BIM Interface (gbXML)