Внос на файлове

Продукт	InstalSystem 5
Вид статия	FUNCTION AND TOOL
Актуално съдържание за версия	IS 5.0 Beta 2.0.B6

Описание

Статията описва функционалността на използването на проектни подложки (чертежи за основа) чрез стартиране на внос на подложка, избор на външен файл, който ще се внася, вмъкване на подложката в проекта и подходящо мащабиране и позициониране.
Съвместими формати на файлове за внос на проектни подложки:

• Векторни формати

  - DWG

  - DXF

• Растерни формати

  - PDF

  - BMP

  - PNG

  - JPG

  - GIF

МЕСТОПОЛОЖЕНИЕ В ПРОГРАМАТА

• Икони на елементи и функции, свързани с импортирането на подложка, се намират в прозореца "2D редактор" в прозореца на лента с интрументи Главни ленти с инструменти, секция Основа, когато Основа е разрешен обхватът за редактиране.
  

  Файл:TB-underlay-import-location.png

  1. Внос на подложка

  
  

Example of use

Import underlay in vector format

1. Select Внеси подложка.
2. Select the underlay file to be imported.
3. Verify that the dimensions of the underlay are adequate.
   • The size of the underlay can be changed in the component data table or using the Мащабиране tool. Additionally, in the case of a DWF/DXF file, a conversion factor between a CAD unit and a multiple or sub-multiple of a meter can be selected in the data table. This feature is especially convenient for changing dimensions of vector graphic base drawing.
   • Conversion between CAD units and unit of length used in program (Таблица с данни -> Мерна единица на чертеж)

Import underlay in raster format

1. Select Внеси подложка.
2. Select the underlay file to be imported.
3. Indicate the position of the underlay in the Основа editing scope.
4. Verify that the dimensions of the underlay are adequate.
   • The size of the underlay can be changed in the component data table or using the Мащабиране tool.
   • Мащабиране of raster graphic base drawings (using АВТО mode is not applicable, due to the raster graphic specification)

Obtaining the correct mutual alignment of underlays on the individual storeys

1. In order to get proper structure of a multi-storey building it is advisable to use a Относителна точкаФайл:Reference-point.png, wherein one reference point is placed in each worksheet at a location having identical real coordinates X,Y. Placing procedure is the same for both base drawing formats (vector and raster).
   
   
   

Additional information

1. It is particularly advantageous to import an underlay in the DWG format, which enables, when editing the structure, attracting the cursor to components located in the indicated layers of the underlay (snap function).
2. If necessary, it is possible to confine (reduce) the visible area for underlays, e.g. underlays that include plans of several storeys on one sheet. The operation of confining the visible area may be cancelled at any stage of project creation.
   
   
   
3. If an underlay is divided into several parts (which may, for instance, result from scanning operations), these individual parts can be imported separately and subsequently combined using the Combine base files functionality.
4. The underlay may be stored in the project file *.ISPROJ, in which case the size of that file is increased (identical underlay files placed on multiple worksheets do not inflate the project file in proportion to the number of times the underlay is used), or it may remain in a separate (original) file to which the project will refer. The latter solution requires, when the project file is handed over to another person, that the underlay files are also turned over and the access paths to the files in the computer are specified. Underlay storage options and its access path can be verified in Таблица с данни in Идентификация на елемент section.
   

   Файл:Underlay - localization and saving options.jpg

   2. Underlay storage options