* <span style="color: red> In the case of virtual connections, automatically generated loops originate from arbitrary points indicated by the program. After pipe feeds are drawn, the starting points of loops are automatically relocated. The loop drawings can also be automatically modified due to the routes of pipe feeds to other areas/rooms being taken into account.<br>
* <span style="color: red> In the case of virtual connections, automatically generated loops originate from arbitrary points indicated by the program. After pipe feeds are drawn, the starting points of loops are automatically relocated. The loop drawings can also be automatically modified due to the routes of pipe feeds to other areas/rooms being taken into account.<br>
[[bg:Добавяне на чертежи с лъчисти системни пръстени]]
[[en:Appending drawings with radiant system loops]]
[[lt:Piešinių papildymas spindulinės sistemos kilpomis]]
[[lt:Piešinių papildymas spindulinės sistemos kilpomis]]
[[it:Completamento dei disegni con serpentine dei sistemi radianti]]
[[it:Completamento dei disegni con serpentine dei sistemi radianti]]
The Отоплително-охлаждаща повърхност component (floors and ceilings) can be appended with drawings of loops. Drawings generated automatically by the program are refreshed each time the project is recalculated. It is possible to modify or append them and loops can be drawn manually. Manual editing is recommended at the final stage of design.
Location in the program
Общи данни - automatic generation of loops can be enabled for all components by selecting the Създай чертежи със сключени вериги (кръгове) checkbox. Файл:Suf-loops-gdm.png1. Loops drawings - General data
Таблица с данни for component Подова отоплителна/охладителна зона, when working in the Лъчисти подове, стени/Лъчисти тавани editing range, enables:
automatic generation of loops by selecting the Създай чертежи със сключени вериги (кръгове) checkbox; loop generation can be disabled here for a selected component when this checkbox is selected in Общи данни,
The RHC кръг tool available in Главни ленти с инструменти, when working in the Чертежи на пръстен - под/Чертежи на пръстен - таван editing range, enables manual drawing of loops. Use of this tool is recommended with the МРЕЖА mode enabled. Файл:Suf-loops-floor-screen mod.png3.Loop drawings - Graphical editing
Example of use
Automatic generation of loop drawings
Enable generation of loop drawings in general data or for selected components.
Calculate the project Файл:Loops-calculation.png. Upon calculating the project, loop drawings will be generated automatically.
Change direction of loop arrangement (option). After selecting Отоплително-охлаждаща повърхност hotpoints of loop laying direction become available Файл:Direction.png, and in the case of Еднотръбен меандриращ шаблон/Двутръбен меандриращ шаблон a pointer is also available Файл:Side.png for indicating the side along which meandering is to be done. To display the effect of changing the loop laying direction and of indicating other side, the file must be recalculated.
Manual editing of loop drawings
Disable generation of loop drawings for selected components Отоплително-охлаждаща повърхност. Attention! Clearing the Създай чертежи със сключени вериги (кръгове) option does not remove existing drawings of loops, it only freezes them in their current state and enables manual editing or deleting thereof. To completely remove loop drawings double left click the loop and select Delete selected components.
Enable the МРЕЖА mode which helps in correcting or manual drawing of loops. Grid nodes are arranged at the minimum distance allowable for the selected pipe laying pattern. Colours of grid nodes are repeated for the current pipe spacing, which facilitates drawing with the use of that spacing. The grid can be arranged parallel to selected edge of component Подова отоплителна/охладителна зона by positioning on that edge the blue hot-point Файл:Hot-point-obrot.png. It becomes available when component Подова отоплителна/охладителна зона is selected.
Correct/draw manually selected segments of loop.
The loop drawn must be contained completely within the Heating/cooling surface component and must terminate at its edge.
Manual editing of loop drawings in dry systems with guide plates
Manual editing of loops is the only way for designing correct loops in systems based on Суха система плоча type components .
In the case of dry floor systems with Суха система плоча catalog components arranged in the program, the characteristic points of the plates take on the role of a grid.
Loop drawings are not mandatory and they do not have to be complete if the "чертожна дължина на пръстен" option has not been selected.
In the case of virtual connections, automatically generated loops originate from arbitrary points indicated by the program. After pipe feeds are drawn, the starting points of loops are automatically relocated. The loop drawings can also be automatically modified due to the routes of pipe feeds to other areas/rooms being taken into account.
