Бележки към издание InstalSystem 5: Разлика между версии

От HelpSystem
Направо към навигацията Направо към търсенето
Редакция без резюме
Ред 5: Ред 5:
|p4                =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="-->
|p4                =<!--gdy jest kolejny produkt handlowy, zamienić na->"produkt_handlowy3="-->
|category1          =InstalSystem 5#PRODUCT INFORMATIONS
|category1          =InstalSystem 5#PRODUCT INFORMATIONS
|category_name1    =ПРОДУКТОВА ИНФОРМАЦИЯ
|category_name1    =PRODUCT INFORMATION
|c2                =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu-->
|c2                =<!--Jest kategoria -> zamienić na: "category2=" i uzupełnić link do sekcji kategorii na stronie głównej produktu-->
|category_name2    =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...-->
|category_name2    =<!--podać nazwę kategorii "ZASTOSOWANIE"/"FUNKCJONALNOŚĆ"/...-->
|c3                =<!--if there is the second category, change to->"category3="-->
|c3                =<!--if there is the second category, change to->"category3="-->
|category_name3    =<!--fill up with category "SOFTWARE APPLICATION"/"FUNCTIONALITY"/...-->
|category_name3    =<!--fill up with category "SOFTWARE APPLICATION"/"FUNCTIONALITY"/...-->
|version1          =[[Release notes InstalSystem 5#Version BETA 31 Rev. 0,0,B31|IS 5.0 Beta 31]]
|version1          =[[Release notes InstalSystem 5#Version GOLD Rev. 11.0|GOLD Rev. 17.1]]
|v2                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v2                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v3                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v3                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v4                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
|v4                =<!--Jest wersja -> zamienić na: "version2=" i uzupełnić link do sekcji RN danego produktu-->
}}
}}
==Информация относно промени==
 
==Information about changes==
<!--In the absence of changes, standard text is published: "There were no significant functional changes in this release."-->
<!--In the absence of changes, standard text is published: "There were no significant functional changes in this release."-->
<!--===<span style="color: grey;">''RELEASE Rev. XX.Y (planned date of publication DD.MM.YYYY*)''</span>===-->
<!--<span style="color: grey;">* The scheduled date of publication may change. It is presented for information purposes only. InstalSoft is not obliged to release the publication on this date''</span>-->
===RELEASE Rev. 17.1===
* There were no significant functional changes in this release.
===RELEASE Rev. 17.0===
'''<IS_TS id=PH_ISNS5_BASE/>'''
* When inserting an opening in a sloping roof plane, the "z" coordinates  of corner points are determined automatically
* In the ''<IS_TS id=StoreyManagement/>'' window, the values ''<IS_TS id=strLblRzednaKondCaption/>'' and ''<IS_TS id=strLblWysokoscKondygnacjiCaption/>'' are editable, and the complement each other for adjacent stories
* For the top floor, ''<IS_TS id=RzednaSzczytuDachuCaption/>'' property has been added, the change of which corrects the height of that floor
* The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
* When drawing elements "roof edge", ''<IS_TS id=rpOtworWdachu/>'', ''<IS_TS id=Lukarna/>'' in AUTO mode, snapping to DWG base elements is carried out
* In the calculations of the building structure, ''<IS_TS id=ScianyNakladajaSieAlboBledniePolaczone/>'' diagnostics was introduced. The contested elements are indicated in the graphical editor
* In the ''<IS_TS id=btUstawienia/>'' tab, sub-tab: ''<IS_TS id=btUstawieniaWygladEkranu/>'', checkbox ''<IS_TS id=disableAdvancedTransparency/>' has been added. Checking can make it easier to work on computers with weaker graphics cards.
* The '''<IS_TS id=pcstrXY/>'' tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.
'''<IS_TS id=PH_IS5_H/>'''
* ''<IS_TS id=iNameHyperlinkRozw/>'' - new functionality available - BETA version
* The ''<IS_TS id=iNameCOKociol/>'' element was introduced as one of the possible properties of the element ''<IS_TS id=iNameCOZrodlo/>'' in the field ''<IS_TS id=strpnZrodloWyglad/>''
* Enabled declaration of dimensions of ''<IS_TS id=iNameCOElementONarzOporze/>'' element from 1 cm.


===Версия BETA Rev. 2.0.B5===
'''<IS_TS id=PH_IS5_RL/>'''
====Модули:====
* Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
'''Основен модул, включително InstalSystem Manager'''
* New criterion of pipe feeds arrangement -AUTO- has been added to ''<IS_TS id=rpStrefaPrzylaczy/>'' tool.
* Въведени терминологични лицензи като допълнителна възможност за лицензиране (достъпна за избрани пакети) с механизми, които подпомагат сроковете и подновяването на контрола (лента с инструменти ''Промени лицензия''),
* Въведена демо версия (налична за избрани пакети).
* Добавена е възможността да се определят оформлението на прозорците.
* Режимът ''АВТО'' е подобрен при вмъкване на ''Референтна точка''.
* Организиран е раздел ''Източници'' в ''Общи данни'' с цел подобряване на ергономичността и интуитивните данни за редактиране.
* Полето ''Под'' в ''Управление на етажи'' получи допълнителен статус ''АВТО'' (стойността се основава на типичната дебелина на подовото отопление).
* Добавена е възможността бързо да се намерят и да се изберат прозорците на активните елементи, за които се показва диагностичното съобщение.
* Добавена е възможността за въвеждане на текстове и бележки в ''2D редактор'' (икони: ''Текст'' и ''Бележка'' в групата ''Етикети и графики'').


===Версия BETA Rev. 2.0.B4===
'''<IS_TS id=PH_IS5_RP/>'''
====Модули:====
* In the general data and in the data table of the element ''<IS_TS id=strefaPaneliSufitowych/>'' the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.
'''Base module, including InstalSystem Manager'''
 
'''<IS_TS id=PH_IS5_T/>'''
* For sanitary appliances, it is possible to declare the frame.
* A declaration of default manifold types has been introduced in the general data.
====Articles in HelpSystem:====
* [[Heat source dimensioning for installations with flat stations]]
* [[Installation with convective heating and water supply system with use of flat stations in a multifunctional building]]
* [[Terminal unit]]
 
===RELEASE Rev. 16.2===
* There were no significant functional changes in this release.
====Articles in HelpSystem:====
* [[Designing of water supply system installation]]
* [[Heating/cooling zone build-up editor]] (actualized)
* [[How to eliminate: "Cannot apply any pipe spacing"]]
 
===RELEASE Rev. 16.1===
* There were no significant functional changes in this release.
 
====Articles in HelpSystem:====
* [[General recommendations for users of InstalSystem 4 starting work with InstalSystem 5]]
 
===RELEASE Rev. 16.0===
{{#ev:youtube|3kCR8vYteN8 |300|left|}}<br clear="all"/>
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
* Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).
 
'''<IS_TS id=PH_IS5_H/>'''
* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the supply and return pipe-runs.
 
'''<IS_TS id=PH_IS5_T/>'''
* Possibility to declare (''<IS_TS id=rsDanogi/>'' window, ''<IS_TS id=StoreyManagement/>'' tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
* Rearrangement of general data tabs.
* New element of the installation - linear drain.
 
'''<IS_TS id=PH_IS5_SM/>'''
* New module enabling the design of heating and water supply installations with the use of flat stations.
 
====Articles in HelpSystem:====
* [[Calculation of design heat load of rooms]] (actualized)
* [[Manifold and accessories]] (actualized)
* [[Pipe feeds route and editing pipe feeds in a radiant system]] (actualized)
* [[Pipe feeds route - Good practices and use cases]] (actualized)
 
===RELEASE Rev. 15.3===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 15.2===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 15.1===
'''<IS_TS id=PH_ISNS5_BASE/>'''
* List of elements displayed in window ''<IS_TS id=ProjectBrowser/>'' ia automatically adapted to currently edited edit scope.
* ''<IS_TS id=strDlgKatalogiObslugaKatalogowHint/>'' window - tabs have been replaced by more precise catalogue filters
* Window ''<IS_TS id=View3D/>'' - possibility to display edges of the elements (available under the button ''<IS_TS id=btShowEdges/>''/''<IS_TS id=btHideEdges/>'' in section ''<IS_TS id=rsView/>'')
* The ability to generate rooms, whose whole area is located in another room
'''<IS_TS id=PH_IS5_H/>'''/ '''<IS_TS id=PH_IS5_C/>'''
* Settings from tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' have been moved to tabs: ''<IS_TS id=InstalacjaRozprowadzajaca/>''-''<IS_TS id=DaneInstalacjiRozprowadzajacejCzynnikGrzewczyChlodniczy/>'' and ''<IS_TS id=iNameCOGrzejnikPlural/>''-''<IS_TS id=GrzejnikiTypyIDane/>'' (tab ''<IS_TS id=DomyslneZaworyIArmatura/>'' has been removed).
'''<IS_TS id=PH_IS5_HL/>'''
* Enabling module ''<IS_TS id=ObliczeniaCieplneBudynku/>'' automatically switches common project setting: ''<IS_TS id=strs_enumidISFOZCDaneOgolneStrataCieplaCalcKindForNewPom/>'' into variant ''<IS_TS id=rsOZCPomieszczenieStrataCieplaCalcKindWgWskaznika/>''
* Enabled correction of room internal temperature (''<IS_TS id=strTempPomOgrzewanieSymbol/>'') of standard room types.
'''<IS_TS id=PH_IS5_RL/>'''
* Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table ''<IS_TS id=strpnOrientation/>'').
*  In the tab ''<IS_TS id=sOpcjeObliczen/>'' in ''<IS_TS id=rsDanogi/>'' window ''<IS_TS id=SpecyficzneOpcjeRynkoweOP/>'' has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the ''<IS_TS id=strPGCh/>''
'''<IS_TS id=PH_IS5_RP/>'''
* <IS_TS id=DataEditorTable/> window of element <IS_TS id=PanelScienny/>/<IS_TS id=iNameCOPanelSufitowy/> - <IS_TS id=stringdpmax/> field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.
'''<IS_TS id=PH_IS5_T/>'''
* Water supply installations designing module - availability depending on package
 
====Articles in HelpSystem:====
* [[Installation with cooling radiant and panel systems in multifunctional building]]
* [[Preparation of building structure - Multi-storey rooms]]
* [[Software configuration - Project table]]
 
===RELEASE Rev. 14.2===
* The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.
===RELEASE Rev. 14.1===
* There were no significant functional changes in this release.
====Articles in HelpSystem:====
* [[Installation with underfloor and wall radiant heating system in single family building]] (actualized)
 
===RELEASE Rev. 14.0===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the ''<IS_TS id=PDFPrint/>''  button directly in the print module's toolbar.
* Possibility to declare the angle (rotation) of fittings (valve, filter etc.)  relative to the pipeline axis (Window: ''<IS_TS id=DataEditorTable/>'', field: ''<IS_TS id=KatObrotu/>'').
* New (separate) style and label for the ''<IS_TS id=ObrysBud/>'' element.
* New field ''<IS_TS id=OdlegloscOdPodlogiCaption/>'' in the data table of the element ''<IS_TS id=iNameDzialka/>''. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
* Attractive graphic styles of certain elements in ''<IS_TS id=View3D/>'', including elements of the building structure.
'''<IS_TS id=PH_IS5_RL/>'''
* ''<IS_TS id=strOptimizationChart/>'' presenting the quality of supply temperature (''<IS_TS id=TemperaturaZasilaniaOPSymbol/>'') in consideration of heating requirements of zones. Available in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=iNameCOZrodloPlural/>'', after first calculations.
* New templates for ''<IS_TS id=iNameTabelkaRozdzielacza/>''
* New field ''<IS_TS id=strPlytaSyst/>'' in window ''<IS_TS id=rsDanogi/>'' on the tab: ''<IS_TS id=DaneInstalacjiPodlogowych/>'' allows declaration of default system plate.
'''<IS_TS id=PH_IS5_HL/>'''
* Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.
====Articles in HelpSystem:====
* [[Introduction to the work with the package InstalSystem 5]] (actualized)
 
===RELEASE Rev. 13.3===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Improvements of algorithm responsible for shaping the roof slopes
===RELEASE Rev. 13.2===
* There were no significant functional changes in this release.
===RELEASE Rev. 13.1===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Rearrangement of icons in ''<IS_TS id=lystrFloors/>''
'''<IS_TS id=PH_IS5_RL/>'''
* Reconstruction and improvements of  ''<IS_TS id=ShowInteractiveCalculationWindow/>''
 
===RELEASE Rev. 13.0===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'''
* Headers of result tables can be locked and visible while scrolling tables.
'''<IS_TS id=PH_IS5_HL/>'''
* Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.
'''<IS_TS id=PH_IS5_RL/>'''
* Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
* Possibility to change orientation (vertically or horizontally) of the ''<IS_TS id=iNameCOReduktorTemp/>''.
* New label for element ''<IS_TS id=iNameCOReduktorTemp/>''.
* <IS_TS id=iNameTabelkaMieszacza/>
* Improvements of algorithm which determines supply temperature for radiant systems.
* Improvements of algorithm which divides element ''<IS_TS id=iNameOPStrefaPowGrzejnych/>'' into ''<IS_TS id=strPGCh/>''.
* Diagnostics of laminar flow.
'''<IS_TS id=PH_IS5_H/>''' and '''<IS_TS id=PH_IS5_C/>'''
* More connection variants for element ''<IS_TS id=iNameCOElementONarzOporze/>''.
 
====Articles in HelpSystem:====
* [[Problems with the application on computers with integrated graphics card]]
 
===RELEASE Rev. 12.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' ''<IS_TS id=PH_5_PM/>'''''
* Improvement of Autosave function
'''''<IS_TS id=PH_5_C/>'''''
*  Implemented cooling system module - availability depending on  package
 
===RELEASE Rev. 12.1===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 12.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improvement of ''<IS_TS id=strAUTOModeName/>'' mode.
* Diagnostics of available graphics cards.
 
'''''<IS_TS id=PH_IS5_DOG/>'''''
* Display of radiator output for manually selected sizes through the ''<IS_TS id=DataEditorTable/>''.
 
'''''<IS_TS id=PH_5_RP/>'''''
* Improvement of readability of ''<IS_TS id=iNameTabelkaRozdzielacza/>''.
* Improvement of algorithm determining drop of temperature on the set of serially connected panels.
 
===RELEASE Rev. 11.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
* Improved function ''<IS_TS id=PartitionsGenerator/>''.
* Improved zoom scale and the preview scale.
* Improved diagnostics concerning errors in the building structure.
* Supplemented information presented in the result tables.
* Integration of ''<IS_TS id=PaperFormat/>'' element with ''<IS_TS id=PrintoutPages_ElementName/>'' element.
 
'''''<IS_TS id=PH_IS5_RL/>'''''
* Improved algorithm of heat output calculations of ''Heated by pipe feeds'' floor type connected virtually.
* Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.
 
'''''<IS_TS id=PH_IS5_H/>'''''
* Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).
 
'''<IS_TS id=PH_IS5_RP/>'''
* Improved flow rates calculations for the serial-connected panels.
 
===RELEASE Rev. 9.2===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 9.1===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 9.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added declare multi-wing doors and windows.
* Added the appearance configuration of the ''<IS_TS id=iNameReferencePoint/>''.
* ''AUTO'' mode has been extended of snap the vertices ''<IS_TS id=rpOtworWstropie/>'' to elements from the DWG underlay.
 
'''''<IS_TS id=PH_5_RL/>'''''
* Improved algorithm of insert ''Heating floor'' in multi-storey rooms (with ''Opening in slab'').
* Implemented automatic algorithm which cuts ''Heating wall'' lying in the area of windows / doors.
 
'''''<IS_TS id=PH_5_HL/>'''''
* Added the possibility of defining ''Tolerance relative to thickness of graphical partition'' (wall, ceilings and roofs), that the ''Partition definitions'' will be assign.
 
'''''<IS_TS id=PH_5_RP/>'''''
* Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
* Maximum height position for the panels has been increased to 30 m.
* Expanded information of the flow rate for panel hint and panel label.
 
===RELEASE Rev. 8.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved diagnostics for incomplete data when ''Generate walls and slabs from rooms and building contour'' algorithm has launched.
* Room label - added the ability of display the ''<IS_TS id=sOpis/>'' field.
* Added the possibilty of creating default room types (with their data and parameters).
* Added configure the appearance of elements during their insertion operations.
* Improved the ergonomy of filling graphic elements data.
 
'''''<IS_TS id=PH_5_HL/>'''''
* Changed diagnostics from error to warning for ''Partition definitions'' with no thickness filled for ''Part. with specified U (Heat transfer coefficient)''.
 
===RELEASE Rev. 7.3===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 7.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* New diagnostic messages for incorrect or incomplete building structure data have been introduced.
* The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).
 
'''''<IS_TS id=PH_5_RP/>'''''
* "Zone of ceiling panels" tool has been improved and developed.
 
====Articles in HelpSystem:====
* [[How to eliminate: "Unbalanced circuit of terminal unit "XY"..."]]
 
===RELEASE Rev. 6.1===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added A0 and A1 formats to printout pages.
* Improved AUTO and ORTO modes.
 
'''''<IS_TS id=PH_IS5_DOG/>'''''
* Added possibility to display in radiator’s label setting of valves insert.
* Allowed defining in project options default distance of radiator from wall.
* Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.
 
'''''<IS_TS id=PH_5_RL/>'''''
* Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
* Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
* Improved algorithm of automatic drawings of radiant heating/cooling loops.
 
====Articles in HelpSystem:====
* [[How to include the drawing loop lenght in the calculations?]]
* [[Preparation of building structure]] (actualized)
* [[Appending drawings with radiant system loops]] (actualized)
* [[Inserting plates in dry floor heating system]]
 
===RELEASE Rev. 5.1===
* There were no significant functional changes in this release.
 
===RELEASE Rev. 5.0===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added dimension lines.
 
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the algorithm of automatic division of heating/cooling floor zone.
* Improved presentation of RHC loop drawing on 3D view.
* Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.
 
====Articles in HelpSystem:====
* [[Automatically connect terminal units]]
* [[Editing pipe feeds in a radiant system - Good practices and use cases]]
* [[Software configuration]] (actualized)
* [[Radiant heating systems - how to improve thermal and hydraulic results]]
* [[Design of radiant heating floor and wall installation]] (actualized)
* [[Design based on a project file from InstalSystem 4]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
* [[Designing radiant heating systems with pipe-runs as distribution system]] (actualized)
 
===RELEASE Rev. 4.0===
====Modules:====
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the algorithm drawing the RHC loop.
 
'''''<IS_TS id=PH_5_RP/>'''''
* Added ceiling panels zone - tool for automatic stacking of ceiling panels.
 
====Articles in HelpSystem:====
* [[Import of building model from BIM compatible formats]]
* [[Import underlay files]] (actualized)
* [[Radiant steel ceiling panels]] (actualized)
* [[Preparation of building structure - Creation of roofs with different construction]]
* [[Preparation of building structure]] (actualized)
 
===RELEASE Rev. 2.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added possibility to saved files read-only.
* 3D view printout has been avaliable.
 
====Articles in HelpSystem:====
* [[Calculation of design heat load of rooms]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]] (actualized)
* [[How to eliminate: "Automatic division of H/C Zone not possible"]]
* [[Presentation of the calculations result]]
 
===RELEASE Rev. 2.1===
* There were no significant functional changes in this release..
 
===RELEASE Rev. 2.0===
====Initial scope of modules:====
* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* '''''<IS_TS id=PH_5_HL/>'''''
* '''''<IS_TS id=PH_IS5_DOG/>'''''
* '''''<IS_TS id=PH_5_RL/>'''''
* '''''<IS_TS id=PH_5_RP/>'''''
* '''''<IS_TS id=PH_5_RLD/>'''''
* '''''<IS_TS id=PH_5_H/>'''''
* '''''<IS_TS id=PH_5_C/>'''''
* '''Interface gbXML (BIM)'''
 
====Initial state of information materials====
* [[InstalSystem 5]]
<!--* TUTAJ DODAĆ LINK DO STRONY WWW Z PRODUKTAMI INSTALSYSTEM 5-->
 
<!--===Version BETA Rev. 2.0.B5===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>''''
* Introduced term licences as additional licensing option (available for selected packages) with mechanisms supporting term and renewal control (''Change license'' tab),
* Introduced demo version (available for selected packages).
* Added the ability to define window layouts.
* The ''AUTO'' mode has been enhanced when inserting the ''Reference point''.
* Organized tab ''Sources'' in the ''General data'' in order to improve the ergonomics and intuitive editing data.
* The field ''Floor'' in the ''Storeys management'' obtained an additional ''AUTO'' status (the value is based on the typical floor heating thickness).
* Added the ability to quickly locate and select the active elements windows for which diagnostic message shows.
* Added the ability to enter text desctiprions and notes in the ''2D editor'' (icons: ''Text'' and ''Note'' in the group ''Labels and graphics'').
 
===Version BETA Rev. 2.0.B4===
====Modules:====
'''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''
* Put in order access to the most important diagnostic messages.
* Put in order access to the most important diagnostic messages.
* Diagnostics has been added to report errors during roof generating.
* Diagnostics has been added to report errors during roof generating.
Ред 41: Ред 385:
* Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.
* Changed the name of the ''Upgrade'' button in Manager for ''Licence change'' button while preserving its original functionality.


'''Heat loss (thermal load)'''
'''''<IS_TS id=PH_5_HL/>'''''
* The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.
* The format ''Heat losses data'' moved from the ''H&E'' window to the ''General Data'' window.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Added the ability to define the default type of 3D valve in the mixer.
* Added the ability to define the default type of 3D valve in the mixer.
* The default mixer size has been corrected.
* The default mixer size has been corrected.


===Версия BETA Rev. 2.0.B3===
===Version BETA Rev. 2.0.B3===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Edit tabs in graphical editor got two new states of visibility:
* Edit tabs in graphical editor got two new states of visibility:
** ''Translucent when active''  - useful when analyzing the partition definitions and graphics partitions in 3D.
** ''Translucent when active''  - useful when analyzing the partition definitions and graphics partitions in 3D.
** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.
** ''The only one visible when inactive'' - automatically inactivates other ranges, regardless of their own settings.


'''Heat loss (thermal load)'''
'''''<IS_TS id=PH_5_HL/>'''''
* Multi-storey rooms  are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
* Multi-storey rooms  are recognized (equivalent to ''interconnected rooms'' in version 4). A multi-storey room is automatically created in the absence of a slab between rooms on adjacent floors when the slab does not cover the whole projection of the room or when the slab has an active opening in slab.
* It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
* It is possible to select partition definitions as ''default for this type and dimensions'' also in the project browser tree, using the pop-up menu.
* It is possible to specify the thickness for the partition definitions without layers (Partition with specified "U") so that they can also be assigned automatically.
* It is possible to specify the thickness for the partition definitions without layers (Partition with specified "U") so that they can also be assigned automatically.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Добавяне на чертежи с лъчисти системни пръстени]] (актуализирана)
* [[Appending drawings with radiant system loops]] (actualized)
* [[Техническа спецификация на пакета InstalSystem 5]] (актуализирана)
* [[Technical specifications of InstalSystem 5 package]] (actualized)


===Версия BETA Rev. 2.0.B2===
===Version BETA Rev. 2.0.B2===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Fixed walls connecting generated automatically by the partitions generator.
* Fixed walls connecting generated automatically by the partitions generator.
* Fixed connecting fragments of the underlay in .pdf format.
* Fixed connecting fragments of the underlay in .pdf format.
Ред 72: Ред 416:
* Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.
* Allowed quickly switching between worksheets in a graphical editor using the arrows next to the selection window of the worksheets.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Moved window of control circuit settings to Thermal systems sources in the General Data.
* Moved window of control circuit settings to Thermal systems sources in the General Data.
* Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.
* Allowed to replace virtual temperature sources with graphic elements by ugins a special button in the control circuit settings in the General Data.


===Версия BETA Rev. 2.0.B1===
===Version BETA Rev. 2.0.B1===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Introduced the ability to search elements in the Project browser based on a string of signs.
* Introduced the ability to search elements in the Project browser based on a string of signs.
* Allowed to insert dormers.
* Allowed to insert dormers.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Проектиране на отоплителни системи с конвекторни радиатори]]
* [[Designing heating systems with convective radiators]]
* [[Проектиране на лъчиста отоплителна инсталация въз основа на данни от смарт приложение]]
* [[Designing of radiant heating installation on the basis of data from the Smart application]]
* [[Отоплителна/охладителна зона]]
* [[Heating/cooling zone]]
* [[Употреба на каталози и каталожна база данни в проекта]]
* [[Using catalogs and catalogs data in the project]]


===Версия BETA 37 Rev. 0.0.B37===
===Version BETA 37 Rev. 0.0.B37===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.
* Improved efficiency of the program in handling with complex projects, time of files upload and regeneration of the 3D view.


'''Radiator sizing'''
'''''<IS_TS id=PH_5_DOG/>'''''
* Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.
* Added the ability to search of radiators and valves placed on the radiators in the search window of elements in the project.


'''Heat loss (thermal load)'''
'''''<IS_TS id=PH_5_HL/>'''''
* Introduced heat loss (thermal load) module in accordance with standard EN 12831.
* Introduced heat loss (thermal load) module in accordance with standard EN 12831.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Подготовка конструкция на сграда]] (актуализирана)
* [[Preparation of building structure]] (actualized)
* [[Smart application - Quick selection of system components]] (актуализирана)
* [[Smart application - Quick selection of system components]] (actualized)


===Версия BETA 35 Rev. 0.0.B35===
===Version BETA 35 Rev. 0.0.B35===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
* Raising the ergonomics of editing the roof by multiedit few vertices at the same time.
* Merge and trim functions identify the premises in one operation.
* Merge and trim functions identify the premises in one operation.
Ред 115: Ред 459:
* Introduced a new feature - Partitions generator.
* Introduced a new feature - Partitions generator.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Редактиране на тръбни серпентини в лъчиста система]] (актуализирана)
* [[Editing pipe feeds in a radiant system]] (actualized)
* [[Общи данни]]
* [[General data]]
* [[Внос на файлове]] (актуализирана)
* [[Import files]] (actualized)
* [[Колектор и принадлежности]] (актуализирана)
* [[Manifold and accessories]] (actualized)
* [[Подготовка конструкция на сграда]]
* [[Preparation of building structure]]


===Версия BETA 34 Rev. 0.0.B34===
===Version BETA 34 Rev. 0.0.B34===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
* Improved import files created in InstalSystem 4 for automatic deletion of elements that are not supported in InstalSystem 5.
* Improved ''Wall'' connection.
* Improved ''Wall'' connection.
* Integrated a full range of Construction processing operations.
* Integrated a full range of Construction processing operations.


'''Radiator sizing'''
'''''<IS_TS id=PH_5_DOG/>'''''
* Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
* Expanded radiator sizing in ''Addition for thermostat'' and ''Addition for casing/chanel''.
* Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.
* Expanded operations on the elements ''Radiators'' about the possibility of ''Flip horizontal''.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Проектиране на лъчисти подови и стенни инсталации]]
* [[Design of radiant heating/radiant cooling installation]]
* [[Проектиране на лъчисто (таванно, стенно) панелно отоплителни/охладителни системи]]
* [[Designing radiant (ceiling, wall) panel heating/cooling systems]]
* [[Проектиране на лъчисти отоплителни системи с клонове като разпределителна система]]
* [[Designing radiant heating systems with pipe-runs as distribution system]]
* [[Лъчисти стоманени таванни панели]]
* [[Radiant steel ceiling panels]]


===Версия BETA 33 Rev. 0.0.B33===
===Version BETA 33 Rev. 0.0.B33===
====Модули:====
====Modules:====
'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
* Improved the data propagation from ''Room'' elements created with walls to the ''Heating/Cooling Wall Zone'' elements.
'''Radiator sizing'''
'''''<IS_TS id=PH_5_DOG/>'''''
* Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.
* Improved the data propagation from ''Room'' elements created with walls to the ''Radiator'' elements.


===Версия BETA 32 Rev. 0.0.B32===
===Version BETA 32 Rev. 0.0.B32===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
* Introduced the ability of creating rooms due to other building structure's elements inserted in the project.
* Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
* Introduced the ability of dividing roof into parts and added new functionality which allows to change ordinates of individual points at the roof's outline to model its real surface.
Ред 156: Ред 500:
* Increased the ergonomy of label editor.
* Increased the ergonomy of label editor.


'''Radiator sizing'''
'''''<IS_TS id=PH_5_DOG/>'''''
* Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.
* Introduced radiator sizing in basic scope. This functionality will be completed and developed in the next beta versions.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Проектиране на лъчисти подови и стенни инсталации]]
* [[Design of radiant heating floor and wall installation]]


===Версия BETA 31 Rev. 0.0.B31===
===Version BETA 31 Rev. 0.0.B31===
====Модули:====
====Modules:====
'''Основен модул, вкл. InstalSystem Мениджър'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Въведена е нова концепция за стенен елементи и функционалности на свързващи стени.
* Introduced a new conception for wall element and the functionality of connecting walls.
* Въведен е нов физичен елемент - плоча.
* Indroduced new physical element - the slab.
* Въведен е нов физичен елемент -покрив.
* Indroduced new physical element - the roof.
* Разширена е функцията "Сянка на етаж" с възможност за деклариране на изобразените сенки за всички долни етажи.
* Expanded function "Shadow of a storey" for possibility to declare shadows displayed for all stories below.


'''Лъчисто отоплително панелна системи'''
'''''<IS_TS id=PH_5_RP/>'''''
* Въведена е възможността за изчисляване на топлинна мощност на таванни/стенни панели съгласно БДС EN 1264.
* Introduced possibility of calculating thermal output of ceiling/wall panels according to EN 1264 standard.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Бележки за промени в InstalSystem Smart5]]
* [[Release notes InstalSystem Smart5]]


===Версия BETA 30 Rev. 0.0.B30===
===Version BETA 30 Rev. 0.0.B30===
====Модули:====
====Modules:====
'''Основен модул, включващ InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
* Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
* Introduced the possibility to handle by the distribution system mail domains with the sign "-".
* Introduced the possibility to handle by the distribution system mail domains with the sign "-".


'''Radiant heating - panel systems'''
'''''<IS_TS id=PH_5_RP/>'''''
* Taken into account results for panels in the radiant heating general results.
* Taken into account results for panels in the radiant heating general results.
* Introduced the presentation of panels connection points on 3D view.
* Introduced the presentation of panels connection points on 3D view.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Editing pipe feeds in a radiant system]] (actualized)
* [[Editing pipe feeds in a radiant system]] (atualizado)
* [[How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"]]
* [[How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"]]
* [[Smart application - Quick selection of system components]]
* [[Smart application - Quick selection of system components]]


===Версия BETA 29 Rev. 16.5.1===
===Version BETA 29 Rev. 16.5.1===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Allowed handling of mail domains containing sign "-" by the licence distribution system.
* Allowed handling of mail domains containing sign "-" by the licence distribution system.
* Improved stability of the program during pasting complex installations.
* Improved stability of the program during pasting complex installations.
Ред 199: Ред 543:
* For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.
* For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).
* Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).


'''Radiant heating - panel systems'''
'''''<IS_TS id=PH_5_RP/>'''''
* Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.
* Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.


'''Radiant heating - dry systems'''
'''''<IS_TS id=PH_5_RLD/>'''''
* Introduced dry system to the neutral catalogue of radiant heating systems.
* Introduced dry system to the neutral catalogue of radiant heating systems.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Installation, activation and update InstalSystem 5 package]]
* [[Installation, activation and update InstalSystem 5 package]]
* [[Manifold and accessories]]
* [[Manifold and accessories]]
* [[Project and application management]]
* [[Project and application management]]


===Версия BETA 28 Rev. 16.4.1===
===Version BETA 28 Rev. 16.4.1===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved the automatic snapping of pipe-runs for the ORTO mode.
* Improved the automatic snapping of pipe-runs for the ORTO mode.
* Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
* Improved the function of rooms interpretation for files imported from '''[[InstalSystem 4]]''' package.
* Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.
* Introduced the ability to insert into the project construction elements: ''Wall'', ''Window'', ''Door'', ''Opening in wall''.


'''Radiant heating - panel systems'''
'''''<IS_TS id=PH_5_RP/>'''''
* Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
* Introduced the possibility to insert into the project element ''Ceiling false panel'' (panel with no connection).
* Added the cooling result card for panel installation: ''General results cooling''.
* Added the cooling result card for panel installation: ''General results cooling''.
* Included elements: ''Wall panel'' and ''Ceiling panel'' in results card: ''General results heating''.
* Included elements: ''Wall panel'' and ''Ceiling panel'' in results card: ''General results heating''.


===Версия BETA 27 Rev. 16.3.1===
===Version BETA 27 Rev. 16.3.1===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved function 'automatically connect terminal units'.
* Improved function 'automatically connect terminal units'.
* Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
* Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
Ред 234: Ред 578:
* Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.
* Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.


'''Radiant heating - dry systems'''
'''''<IS_TS id=PH_5_RP/>'''''
* Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.
* Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.


===Version BETA 26 Rev. 16.2.1===
===Version BETA 26 Rev. 16.2.1===
====Modules:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''',<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved saving files in a network location.
* Improved saving files in a network location.
* Introduced the possibility to choose the source for which you want to appear the critical circuit.
* Introduced the possibility to choose the source for which you want to appear the critical circuit.


===Версия BETA 25 Rev. 16.1.1===
===Version BETA 25 Rev. 16.1.1===
====Modules:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added function that allows automatically connect terminal units.
* Added function that allows automatically connect terminal units.
* Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
* Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
* The problem with sending Problem Report Form is eliminated.
* The problem with sending Problem Report Form is eliminated.


'''Radiant heating - panel systems'''
'''''<IS_TS id=PH_5_RP/>'''''
* Added function that allows connect panels in series.
* Added function that allows connect panels in series.
* Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").
* Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).<br/>''Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Connecting storeys with the "Stack" element]]
* [[Connecting storeys with the "Stack" element]]
* [[View navigation in the graphical editor]]
* [[View navigation in the graphical editor]]
Ред 264: Ред 608:


====Modules:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Improved stability and quality of the program.
* Improved stability and quality of the program.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
* Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
* Standarized the content of data table for heating/cooling zones at various ranges of editing.
* Standarized the content of data table for heating/cooling zones at various ranges of editing.
Ред 273: Ред 617:
* Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.
* Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Export / print results and drawings]]
* [[Export / print results and drawings]]
* [[Software configuration]] (actualized)
* [[Software configuration]] (actualized)
Ред 279: Ред 623:
===Version BETA 23 Rev. 15.11.1===
===Version BETA 23 Rev. 15.11.1===
====Modules:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Fixed the problem with sending the Problem report form.
* Fixed the problem with sending the Problem report form.
* Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
* Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
* The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.
* The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Changed the designation of nodes in the grid which supports the manual drawing of the loop.
* Changed the designation of nodes in the grid which supports the manual drawing of the loop.
* Added message box indicating the inability to remove the RHC loop.
* Added message box indicating the inability to remove the RHC loop.


'''Heating network with balancing'''
'''''<IS_TS id=PH_5_H/>'''''
* Fixed the automatic sizing of manifolds' cabinets.
* Fixed the automatic sizing of manifolds' cabinets.
* Improved the propagation of the default data for manifold cabinet.
* Improved the propagation of the default data for manifold cabinet.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Редактиране на тръбни серпентини в лъчиста система]]
* [[Editing pipe feeds in a radiant system]]
* [[Как да накарате програмата да работи по - бързо?]]
* [[How to make the program run faster]]
* [[Инсталация с таванно отопление и охладителна система в търговска сграда]]
* [[Installation with ceiling heating and cooling system in commercial building]]
* [[Търсене на елементи в проекта]]
* [[Search components in the project]]


===Версия BETA 22 Rev. 15.10.1===
===Version BETA 22 Rev. 15.10.1===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
* Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
* Improved ORTO and AUTO modes.
* Improved ORTO and AUTO modes.
* Fixed the problem with sending error report form after crash of the program.
* Fixed the problem with sending error report form after crash of the program.
* Improved overall stability and quality of the program by eliminating the reported errors.
* Improved overall stability and quality of the program by eliminating the reported errors.
====Статии в HelpSystem:====
* [[Внос на файлове]]
* [[Добавяне на чертежи с лъчисти системни пръстени]]


===Версия BETA 21 Rev. 15.9.2===
====Articles in HelpSystem:====
====Модули:====
* [[Import files]]
'''Base module, including InstalSystem Manager'''
* [[Appending drawings with radiant system loops]]
 
===Version BETA 21 Rev. 15.9.2===
====Modules:====
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Modified the way of importing base drawing files.
* Modified the way of importing base drawing files.
* Added a ''Select components in rectangle'' function under the left mouse button.
* Added a ''Select components in rectangle'' function under the left mouse button.
Ред 317: Ред 662:
* Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.
* Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
* Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
* Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.
* Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.


'''Heating network with balancing'''
'''''<IS_TS id=PH_5_H/>'''''
* Added the possibility to use multi-circuit heating floor zone.
* Added the possibility to use multi-circuit heating floor zone.
* Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
* Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
Ред 327: Ред 672:
* Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.
* Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Изчисление на охладителния капацитет за лъчисти системи (подово, стенно или таванно)]]
* [[Calculation of cooling capacity for radiant systems (floor, wall or ceiling)]]
* [[How to calculate a file using a package configuration other than the one under which the file was created]]
* [[How to calculate a file using a package configuration other than the one under which the file was created]]
* [[Инсталация с подово и стенно лъчисто отоплителна система в едно-фамилна сграда]]
* [[Installation with underfloor and wall radiant heating system in single family building]]


===Версия BETA 16.1 Rev. 15.5.17===
===Version BETA 16.1 Rev. 15.5.17===
====Модули:====
====Modules:====
'''Base module, including InstalSystem Manager'''
'''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* Added new tool to search and select items in the project.
* Added new tool to search and select items in the project.
* Improved the import and export of bases.
* Improved the import and export of bases.
Ред 341: Ред 686:
* Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.
* Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.


'''Radiant heating - loop systems'''
'''''<IS_TS id=PH_5_RL/>'''''
* Improved the functionality of pipe feed automatic generation.
* Improved the functionality of pipe feed automatic generation.


====Статии в HelpSystem:====
====Articles in HelpSystem:====
* [[Software configuration]]
* [[Software configuration]]


===Версия BETA 15.1 Rev. 15.4.21===
===Version BETA 15.1 Rev. 15.4.21===
====Initial scope of modules:====
====Initial scope of modules:====
* '''Base module, including InstalSystem Manager'''
* '''''<IS_TS id=PH_ISNS5_BASE/>'' i ''<IS_TS id=PH_5_PM/>'''''
* '''Radiant heating - loop systems'''
* '''''<IS_TS id=PH_5_RL/>'''''
* '''Cooling mode for radiant systems'''
* '''''<IS_TS id=PH_5_C/>'''''
* '''Heating network with balancing'''
* '''''<IS_TS id=PH_5_H/>'''''
* '''BIM Interface (gbXML)'''
* '''''<IS_TS id=PH_5_gbXML/>'''''
====Начално състояние на статии в HelpSystem HelpSystem====
====Initial state of articles in HelpSystem====
* [[Техническа спецификация на пакета InstalSystem 5]]
* [[Technical specifications of InstalSystem 5 package]]
* [[Въведение в работа с пакета InstalSystem 5]]
* [[Introduction to the work with the package InstalSystem 5]]-->


[[Category:InstalSystem 5]]
[[Category:InstalSystem 5]]
[[Category:PRODUCT INFORMATION]]
[[Category:PRODUCT INFORMATION]]
[[en:Release notes InstalSystem 5]]
[[it:Informazioni sulle pubblicazioni InstalSystem 5]]
[[it:Specifiche tecniche del pacchetto InstalSystem 5]]
[[pl:Informacje o publikacjach InstalSystem 5]]
[[pl:Specyfikacja techniczna pakietu InstalSystem 5]]
[[lt:InstalSystem 5 Pastabos apie versiją]]
[[lt:Pakieto_InstalSystem_5_techninė_specifikacija]]
[[bg:Информация относно промени в InstalSystem 5]]
[[pt:Especificações técnicas do pacote InstalSystem 5]]
[[zh-cn:InstalSystem 5 版本发布说明]]
[[zh-cn:InstalSystem 5 软件包技术说明]]

Версия от 20:54, 18 декември 2019

Продукт InstalSystem 5
Вид статия PRODUCT INFORMATION
Актуално съдържание за версия GOLD Rev. 17.1


Information about changes

RELEASE Rev. 17.1

  • There were no significant functional changes in this release.

RELEASE Rev. 17.0

Основен модул

  • When inserting an opening in a sloping roof plane, the "z" coordinates of corner points are determined automatically
  • In the Управление на етажи window, the values Етажна кота and Етажна височина are editable, and the complement each other for adjacent stories
  • For the top floor, Кота било на покрив property has been added, the change of which corrects the height of that floor
  • The option of distinguishing the style and label of a "manual" room (drawn directly) from "automatic" (generated automatically based on the arrangement of walls and slabs) has been introduced.
  • When drawing elements "roof edge", Отвор в покрива, Капандура in AUTO mode, snapping to DWG base elements is carried out
  • In the calculations of the building structure, Има препокриващи се или неправилно свързани стени diagnostics was introduced. The contested elements are indicated in the graphical editor
  • In the Настройки tab, sub-tab: Изглед на екрана, checkbox Деактивирай разширено представяне на прозрачност в3D' has been added. Checking can make it easier to work on computers with weaker graphics cards.
  • The 'Положение tab has been added to the configuration of element label styles, where you can specify the default position of the label relative to the parent.

Отоплителни системи

  • Автоматичен схематичен изглед на инсталация - new functionality available - BETA version
  • The Котел element was introduced as one of the possible properties of the element Генератор на топлина и студ in the field Графично представяне
  • Enabled declaration of dimensions of Терминален прибор element from 1 cm.

Лъчисти системи

  • Ergonomy of corrections of pipe loops and pipe feeds drawings generated automatically and drawn manually has been improved.
  • New criterion of pipe feeds arrangement -AUTO- has been added to Трасе на тръбни серпентини tool.

Панелни системи

  • In the general data and in the data table of the element Зона на таванни панели the possibility of declaration of automatic placement of adjacent rows of panels in the zone with mutual offset has been introduced.

Питейни-битови водни системи

  • For sanitary appliances, it is possible to declare the frame.
  • A declaration of default manifold types has been introduced in the general data.

Articles in HelpSystem:

RELEASE Rev. 16.2

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 16.1

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 16.0


Основен модул

  • Many elements of the installation (radiator, valve, pump, etc.) by default are inserted with label.
  • Possibility of precise control of pipe-runs arrangement, with different ordinates of the beginning and end of the pipe-run (case of pipe-runs carried out in inclined ceilings / walls).

Отоплителни системи

  • Possibility to declare (Общи данни window, Управление на етажи tab) the default distance from the floor separately of the supply and return pipe-runs.

Питейни-битови водни системи

  • Possibility to declare (Общи данни window, Управление на етажи tab) the default distance from the floor separately of the hot water, cold water and circulation pipe-runs.
  • Rearrangement of general data tabs.
  • New element of the installation - linear drain.

Плоски станции

  • New module enabling the design of heating and water supply installations with the use of flat stations.

Articles in HelpSystem:

RELEASE Rev. 15.3

  • There were no significant functional changes in this release.

RELEASE Rev. 15.2

  • There were no significant functional changes in this release.

RELEASE Rev. 15.1

Основен модул

  • List of elements displayed in window Проектен браузър ia automatically adapted to currently edited edit scope.
  • Каталози window - tabs have been replaced by more precise catalogue filters
  • Window 3D изглед - possibility to display edges of the elements (available under the button Покажи ръбове/Скрий ръбове in section Изглед)
  • The ability to generate rooms, whose whole area is located in another room

Отоплителни системи/ Охладителни системи

  • Settings from tab have been moved to tabs: Разпределителна система-Видове и данни по подразбиране and Отоплителни тела-Отоплителни тела/Радиаторни вентили - типове и данни по подразбиране (tab has been removed).

Топлинни загуби

  • Enabling module Топлинни изчисления на сграда automatically switches common project setting: Метод на изчисление Φ into variant Изчислен съгл. коефицент
  • Enabled correction of room internal temperature (θi,О) of standard room types.

Лъчисти системи

  • Manifold can be placed on a drawing in horizontal position or with upward outlet ports (configuration via new field in data table Ориентация).
  • In the tab Допълнителни опции in Общи данни window Специфични пазарни опции has been added - possibility to choose the method of the calculation without a surplus to flow rate for compensation of heat flow to the other side of the Отоплително-охлаждаща повърхност

Панелни системи

  • Таблица с данни window of element Стенен панел/Тавенен панел - Δpмакс. field has been added thus enabling control of maximum pressure drop in single panel or set of panels in serial connection.

Питейни-битови водни системи

  • Water supply installations designing module - availability depending on package

Articles in HelpSystem:

RELEASE Rev. 14.2

  • The amount and content of neutral product databases available in different language versions has been unified, what will facilitate the transfer of projects between versions.

RELEASE Rev. 14.1

  • There were no significant functional changes in this release.

Articles in HelpSystem:

RELEASE Rev. 14.0

Modules:

Основен модул

  • A new access to PDF creation of text printouts. If the appropriate driver is installed in the system, the program uses it and provides the Печат към PDF button directly in the print module's toolbar.
  • Possibility to declare the angle (rotation) of fittings (valve, filter etc.) relative to the pipeline axis (Window: Таблица с данни, field: Ъгъл на завъртане).
  • New (separate) style and label for the Контур на сграда element.
  • New field Разстояние от под (зададено в данни за етажа) in the data table of the element Участък. Facilitates the control of the elevation of the network and allows correct copying of the repetitive installation to other floors.
  • Attractive graphic styles of certain elements in 3D изглед, including elements of the building structure.

Лъчисти системи

  • Графика на оптимизация presenting the quality of supply temperature (θs,О rad) in consideration of heating requirements of zones. Available in window Общи данни on the tab: Източници, after first calculations.
  • New templates for Таблица на колектор
  • New field Конструктивен панел in window Общи данни on the tab: Подови системи allows declaration of default system plate.

Топлинни загуби

  • Improvement of the algorithm recognizing the area of the wall above the windows in a wall adjacent to ground, located entirely below the ground.

Articles in HelpSystem:

RELEASE Rev. 13.3

Modules:

Основен модул

  • Improvements of algorithm responsible for shaping the roof slopes

RELEASE Rev. 13.2

  • There were no significant functional changes in this release.

RELEASE Rev. 13.1

Modules:

Основен модул

  • Rearrangement of icons in Конструкция

Лъчисти системи

  • Reconstruction and improvements of Интерактивни изчисления на лъчисти системи

RELEASE Rev. 13.0

Modules:

Основен модул

  • Headers of result tables can be locked and visible while scrolling tables.

Топлинни загуби

  • Possibility to assign thermal partition definition (with defined U value) to construction partition of the same type, irrespective to its thickness.

Лъчисти системи

  • Pipe-feeds for underfloor heating/cooling system can be laid in insulation layer (below heating/cooling pipes in the screed)
  • Possibility to change orientation (vertically or horizontally) of the Смесител / Помпен агрегат.
  • New label for element Смесител / Помпен агрегат.
  • Диаграма на смесител / контролна единица
  • Improvements of algorithm which determines supply temperature for radiant systems.
  • Improvements of algorithm which divides element Отоплителна/Охладителна зона into Отоплително-охлаждаща повърхност.
  • Diagnostics of laminar flow.

Отоплителни системи and Охладителни системи

  • More connection variants for element Терминален прибор.

Articles in HelpSystem:

RELEASE Rev. 12.2

Modules:

Основен модул Пакетен мениджър

  • Improvement of Autosave function

  • Implemented cooling system module - availability depending on package

RELEASE Rev. 12.1

  • There were no significant functional changes in this release.

RELEASE Rev. 12.0

Modules:

Основен модул i Пакетен мениджър

  • Improvement of АВТО mode.
  • Diagnostics of available graphics cards.

Оразмеряване на радиатори

  • Display of radiator output for manually selected sizes through the Таблица с данни.

  • Improvement of readability of Таблица на колектор.
  • Improvement of algorithm determining drop of temperature on the set of serially connected panels.

RELEASE Rev. 11.0

Modules:

Основен модул i Пакетен мениджър'

  • Improved function Автоматични стени, плочи и покриви.
  • Improved zoom scale and the preview scale.
  • Improved diagnostics concerning errors in the building structure.
  • Supplemented information presented in the result tables.
  • Integration of Размер на хартия element with Отпечатване на страници element.

Лъчисти системи

  • Improved algorithm of heat output calculations of Heated by pipe feeds floor type connected virtually.
  • Improved algorithm which automatically inserts a heating/cooling floors into rooms with a hole in the slab.

Отоплителни системи

  • Improved automatic connections of integrated radiators to distrubution pipes, depending on the configuration: valve shape (straight, angle) and connection direction (from the floor, from the wall).

Панелни системи

  • Improved flow rates calculations for the serial-connected panels.

RELEASE Rev. 9.2

  • There were no significant functional changes in this release.

RELEASE Rev. 9.1

  • There were no significant functional changes in this release.

RELEASE Rev. 9.0

Modules:

Основен модул i Пакетен мениджър

  • Added declare multi-wing doors and windows.
  • Added the appearance configuration of the Относителна точка.
  • AUTO mode has been extended of snap the vertices Отвор в плоча to elements from the DWG underlay.

  • Improved algorithm of insert Heating floor in multi-storey rooms (with Opening in slab).
  • Implemented automatic algorithm which cuts Heating wall lying in the area of windows / doors.

  • Added the possibility of defining Tolerance relative to thickness of graphical partition (wall, ceilings and roofs), that the Partition definitions will be assign.

  • Improved determination of the optimal refrigerating level (Δθ) for the serial-connected panels.
  • Maximum height position for the panels has been increased to 30 m.
  • Expanded information of the flow rate for panel hint and panel label.

RELEASE Rev. 8.0

Modules:

Основен модул i Пакетен мениджър

  • Improved diagnostics for incomplete data when Generate walls and slabs from rooms and building contour algorithm has launched.
  • Room label - added the ability of display the Описание field.
  • Added the possibilty of creating default room types (with their data and parameters).
  • Added configure the appearance of elements during their insertion operations.
  • Improved the ergonomy of filling graphic elements data.

  • Changed diagnostics from error to warning for Partition definitions with no thickness filled for Part. with specified U (Heat transfer coefficient).

RELEASE Rev. 7.3

  • There were no significant functional changes in this release.

RELEASE Rev. 7.2

Modules:

Основен модул i Пакетен мениджър

  • New diagnostic messages for incorrect or incomplete building structure data have been introduced.
  • The rank of the message with zero thickness of the partition definition has been reduced to a warning or hint (when the definition has no default status).

  • "Zone of ceiling panels" tool has been improved and developed.

Articles in HelpSystem:

RELEASE Rev. 6.1

Modules:

Основен модул i Пакетен мениджър

  • Added A0 and A1 formats to printout pages.
  • Improved AUTO and ORTO modes.

Оразмеряване на радиатори

  • Added possibility to display in radiator’s label setting of valves insert.
  • Allowed defining in project options default distance of radiator from wall.
  • Improved graphical presentation of radiators mounting items (so-called consoles) on plan views.

  • Added possibility to choose criterion of supply temperature optimization in radiant systems with correction of the algorithm's operation.
  • Improved algorithm of automatic division Heating/Cooling Zones into Heating/Cooling Areas.
  • Improved algorithm of automatic drawings of radiant heating/cooling loops.

Articles in HelpSystem:

RELEASE Rev. 5.1

  • There were no significant functional changes in this release.

RELEASE Rev. 5.0

Modules:

Основен модул i Пакетен мениджър

  • Added dimension lines.

  • Improved the algorithm of automatic division of heating/cooling floor zone.
  • Improved presentation of RHC loop drawing on 3D view.
  • Extended functionality of pipe feed route to automatically fill the entire width of the stip with pipe feeds.

Articles in HelpSystem:

RELEASE Rev. 4.0

Modules:

  • Improved the algorithm drawing the RHC loop.

  • Added ceiling panels zone - tool for automatic stacking of ceiling panels.

Articles in HelpSystem:

RELEASE Rev. 2.2

Modules:

Основен модул i Пакетен мениджър

  • Added possibility to saved files read-only.
  • 3D view printout has been avaliable.

Articles in HelpSystem:

RELEASE Rev. 2.1

  • There were no significant functional changes in this release..

RELEASE Rev. 2.0

Initial scope of modules:

  • Основен модул i Пакетен мениджър
  • Оразмеряване на радиатори
  • Interface gbXML (BIM)

Initial state of information materials

Взето от „https://bg.test.help.instalsoft.com/index.php?title=Бележки_към_издание_InstalSystem_5&oldid=12854“.