Бележки към издание InstalSystem 5

Продукт	InstalSystem 5
Вид статия	PRODUCT INFORMATION
Актуално съдържание за версия	IS 5.0 Beta 31

Информация относно промени

Версия BETA 31 Rev. 0.0.B31

Модули:

Основен модул, вкл. InstalSystem Мениджър

• Въведена е нова концепция за стенен елементи и функционалности на свързващи стени.
• Въведен е нов физичен елемент - плоча.
• Въведен е нов физичен елемент -покрив.
• Разширена е функцията "Сянка на етаж" с възможност за деклариране на изобразените сенки за всички долни етажи.

Лъчисто отоплително панелна системи

• Въведена е възможността за изчисляване на топлинна мощност на таванни/стенни панели съгласно БДС EN 1264.

Статии в HelpSystem:

• Бележки за провени в InstalSystem Smart5

ВерсияBETA 30 Rev. 0.0.B30

Модули:

Основен модул, включващ InstalSystem Manager

• Allowed to control the content of diagnostic messages using the checkbox "Messages for selected components" on the list of filters in the diagnostics window.
• Introduced the possibility to handle by the distribution system mail domains with the sign "-".

Radiant heating - panel systems

• Taken into account results for panels in the radiant heating general results.
• Introduced the presentation of panels connection points on 3D view.

Articles in HelpSystem:

• Editing pipe feeds in a radiant system (actualized)
• How to eliminate problems with the diagnostic message: "Automatic arrangement of pipe feeds not possible - change pipe feeds route or H/C Zone parameters or arrange pipe feeds manually"
• Smart application - Quick selection of system components

Версия BETA 29 Rev. 16.5.1

Модули:

Base module, including InstalSystem Manager

• Allowed handling of mail domains containing sign "-" by the licence distribution system.
• Improved stability of the program during pasting complex installations.
• Introduced the ability to display the storeys shadow above and below on 2D view.
• For each element with snapping possibility added the ability to set in the AUTO mode a parameter which predetermine distance from the edge of another inserted element.

Radiant heating - loop systems

• Corrected a bug related to the manual connecting RHC loop directly to the manifold (without pipe-runs).

Radiant heating - panel systems

• Allowed the presentation of data in the printout of 'Manifold table' for panel systems installation.

Radiant heating - dry systems

• Introduced dry system to the neutral catalogue of radiant heating systems.

Articles in HelpSystem:

• Installation, activation and update InstalSystem 5 package
• Manifold and accessories
• Project and application management

Версия BETA 28 Rev. 16.4.1

Modules:

Base module, including InstalSystem Manager

• Improved the automatic snapping of pipe-runs for the ORTO mode.
• Improved the function of rooms interpretation for files imported from InstalSystem 4 package.
• Introduced the ability to insert into the project construction elements: Wall, Window, Door, Opening in wall.

Radiant heating - panel systems

• Introduced the possibility to insert into the project element Ceiling false panel (panel with no connection).
• Added the cooling result card for panel installation: General results cooling.
• Included elements: Wall panel and Ceiling panel in results card: General results heating.

Версия BETA 27 Rev. 16.3.1

Modules:

Base module, including InstalSystem Manager

• Improved function 'automatically connect terminal units'.
• Made available the ability to configure the buttons to select a group of elements (SHIFT and CTRL).
• Introduced possibility of selecting 'None' in the climatic data in case of lack of apropriate climatic data catalogue in the program.
• Added the function of the graphic presentation of the route of flow from a given receiver to the source.
• Added the function of the graphic presentation of routes flow from the source (manifold, source) to all receivers, which it supplies.

Radiant heating - dry systems

• Introduced handling underfloor panels which lead the pipes in dry systems of radiant heating.

Version BETA 26 Rev. 16.2.1

Modules:

Base module, including InstalSystem Manager

• Improved saving files in a network location.
• Introduced the possibility to choose the source for which you want to appear the critical circuit.

Версия BETA 25 Rev. 16.1.1

Modules:

Base module, including InstalSystem Manager

• Added function that allows automatically connect terminal units.
• Added possibility of quick creating rectangular room with sides parallel to the X, Y by drawing diagonal of the room.
• The problem with sending Problem Report Form is eliminated.

Radiant heating - panel systems

• Added function that allows connect panels in series.
• Introduced the possibility to design heating/cooling installations using ceiling/wall panels (including radiant steel ceiling panels).
  Attention! Required upgrade to the configuration with the new module (InstalSystem Manager - tab "Upgrade").

Articles in HelpSystem:

• Connecting storeys with the "Stack" element
• View navigation in the graphical editor
• Combine base files

Version BETA 24 Rev. 15.12.1

Warning! For this version of the program the reinstallation is necessary.

Modules:

Base module, including InstalSystem Manager

• Improved stability and quality of the program.

Radiant heating - loop systems

• Added a message about the lack of possibility for editing automatically generated pipe feeds/RHC loops.
• Standarized the content of data table for heating/cooling zones at various ranges of editing.
• Introduced permanent visibility of the field Pipe laying pattern in the data table for heating/cooling zones.
• Fixed an error that occurs while connecting pipe feeds route to the heating/cooling zone.

Articles in HelpSystem:

• Export / print results and drawings
• Software configuration (actualized)

Version BETA 23 Rev. 15.11.1

Modules:

Base module, including InstalSystem Manager

• Fixed the problem with sending the Problem report form.
• Added icons for the .isproj files displayed in the InstalSystem Manager and in the Windows Explorer's window.
• The scope of the displayed catalogues in the general data has been adapted to the available project scope for the package.

Radiant heating - loop systems

• Changed the designation of nodes in the grid which supports the manual drawing of the loop.
• Added message box indicating the inability to remove the RHC loop.

Heating network with balancing

• Fixed the automatic sizing of manifolds' cabinets.
• Improved the propagation of the default data for manifold cabinet.

Articles in HelpSystem:

• Editing pipe feeds in a radiant system
• How to make the program run faster
• Installation with ceiling heating and cooling system in commercial building
• Search components in the project

Версия BETA 22 Rev. 15.10.1

Modules:

Base module, including InstalSystem Manager

• Added graphical rulers (horizontal and vertical) to help verify the scale of loaded underlay.
• Improved ORTO and AUTO modes.
• Fixed the problem with sending error report form after crash of the program.
• Improved overall stability and quality of the program by eliminating the reported errors.

Articles in HelpSystem:

• Import files
• Appending drawings with radiant system loops

Версия BETA 21 Rev. 15.9.2

Modules:

Base module, including InstalSystem Manager

• Modified the way of importing base drawing files.
• Added a Select components in rectangle function under the left mouse button.
• Improved acting of ORTO mode when moving objects.
• Accelerated loading of the newly created or saved again files, as a consequence the files created on previous versions may load slower.

Radiant heating - loop systems

• Added the possibility of parallel connection of several RHC loop to one common outlet from the manifold.
• Introduced balance diagnostics of the RHC loop connected to the manifold with not integrated balancing valves, and the possibility of adding on the pipe-runs valves which are balancing these objects.

Heating network with balancing

• Added the possibility to use multi-circuit heating floor zone.
• Introduced balance diagnostics of the circuits by the heating floor zones in the systems without the manifold.
• Added the possibility to supply multi-circuit heating floor zone from several manifolds.
• Introduced the possibility of supplying heating/cooling zones directly from the virtual or graphical source, without the usage of a manifold.

Articles in HelpSystem:

• Calculation of cooling capacity for radiant systems (floor, wall or ceiling)
• How to calculate a file using a package configuration other than the one under which the file was created
• Installation with underfloor and wall radiant heating system in single family building

Version BETA 16.1 Rev. 15.5.17

Modules:

Base module, including InstalSystem Manager

• Added new tool to search and select items in the project.
• Improved the import and export of bases.
• Introduced the control of print range which based on the edition range and the elements' styles.
• Introduced the possibility to highlight and select project's elements to which messages on the diagnostic list referred to.
• Added the possibility to highlight on the worksheet elements forming the circuit of specified receptor from this worksheet.

Radiant heating - loop systems

• Improved the functionality of pipe feed automatic generation.

Articles in HelpSystem:

• Software configuration

Версия BETA 15.1 Rev. 15.4.21

Initial scope of modules:

• Base module, including InstalSystem Manager
• Radiant heating - loop systems
• Cooling mode for radiant systems
• Heating network with balancing
• BIM Interface (gbXML)

Initial state of articles in HelpSystem

• Technical specifications of InstalSystem 5 package
• Introduction to the work with the package InstalSystem 5