Бързо оразмеряване и оценка на подово отопление

Продукт	InstalSystem Smart 5
Вид статия	DESIGN APPLICATION
Актуално съдържание за версия	SMART 5.0 Version BETA 9

Scope of lesson

The article shows how to make a fast appraisal and how to draw up a list of radiant heating system components by means of the InstalSystem SMART mobile application.

Modules and program configuration

• Instalsystem Smart application - Quick selection and listing of system components
• Mobile device: a smartphone or a tablet.
  
• Internet connection.
  За повече информация, моля вижте: Technical specifications of InstalSystem Smart 5

Steps to perform

Preparing the working environment

1. Download the application.
   InstalSystem Smart can be obtained upon contacting InstalSoft s.c. at: info@instalsoft.com.pl.
   The test version can be obtained through:
   • a link to the installation file in case of Android devices. The file should then be moved to the internal memory of the device and installed at the operating system interface level,
   • an e-mail with an invitation to closed TestFlight tests in case of iOS devices. The invitation is sent to the e-mail address linked to the obligatory user's account on AppStore which enables installation of the application at the AppStore interface.
2. Install the application on the mobile device.
3. Launch the application.
4. Enter the user's data:
   • First name
   • Surname
   • E-mail address to which project files will be sent
   • Company
   • Address (Street)
   • Zip (postal) code
   • City
   • Telephone.
     

     Файл:Smart-config-user-data2.png

     1. Settings

     
     

Start page

1. Open new project.
2. Open existing project.
   

   Файл:Smart-start2.png

   2. Start page

   
   

Specifying project default data

1. Enter project data:
   • Project name
   • Customer's e-mail and additional e-mails, if any.
     

     Файл:Smart-projekt-info2.png

     3. Project data

     
     
2. Enter building data:
   • Building location
   • Heat loss coefficient.
     

     Файл:Smart-building-data2.png

     4. Building data

     
     
3. Enter heating system data:
   • Fastening system
   • Pipe type and diameter
   • Manifold type
   • Manifold cabinet
   • Supply temperature - determined automatically or specified by user
   • Default pipe spacing
   • Screed type
   • Covering.
     

     Файл:Smart-radiant-systems-data2.png

     5. Heating system data

     
     

Project editing - managing storeys

1. Add the required storeys.
2. Enter storey data.
3. Enter building surroundings data.
   

   Файл:Smart-storeys-management.png

   6. Managing storeys

   
   

Project editing - loading underlays (base drawings)

• The underlays may be in the form, for instance, of graphics loaded from a gallery, or a photo from a camera.
  

Project editing - entering and editing room and manifold data

• Only one manifold can be installed on a single storey.
  

Calculations and diagnostics

1. Launch calculations.
2. Verify diagnostic messages.
3. Verify calculation results, in particular:
   • heat demand coverage in rooms,
   • bills of materials.
4. Sending project to e-mail address.
   

Additional information

Continuation of the design in the InstalSystem 5

Result of calculation in the InstalSystem Smart 5 can be continued in the InstalSystem 5.
За повече информация, моля вижте: Designing on the basis of data from the Smart application

Other functions

1. Change viewing scale of drawing:
   

   Файл:Smart-function-view.png

   7.Change viewing scale of drawing.

   
   
2. Edit component data (invoke the function and select the component):
   

   Файл:Smart-function-edition.png

   8.Edit component data.

   
   
3. Load plan of storey (from gallery or take a photo and use it as an underlay):
   

   Файл:Smart-function-source-underlay.png

   9.Load plan of storey.

   
   
4. Remove component (invoke the function and select the component):
   

   Файл:Smart-function-delete.png

   10.Remove component.

   
   

Data exchange via internet

• STEP: Launch application and complete user profile.
  No data is exchanged with the server and internet connection is not used.
• STEP: New project execution.
  Data exchange is low and the type and speed of the connection is not meaningful.
• STEP: Project editing (general).
  No data is exchanged with the server and internet connection is not used.
• STEP: Calculations.
  Data exchange is high.
• STEP: Sending project data to an e-mail.
  Data exchange is high.